Stripe prints, patchy pattern of the jet test, but also an unsatisfactory color results - are an indication that your print head or print heads in your„lack of care“ suffer!

If your print head should be already blocked or dried out, helping our cleaning fluid.

Correct use

1. Remove the food cartridge after the last printed image from the print head or print heads.

 

2. Remove the printhead from the printer (press the gray lever up, then he can take out easily)

 

3. Place the print head in a bowl or thick fabric

 

4. Then empty some of the cleaning liquid (jet would be covered) in the printhead

 

5. Then let the whole stand for several hours (preferably overnight)

 

6. Then empty the rest of the fluid out and clean the head with a steam jet cleaner.

 

7. Then you put the cartridges, go on head cleaning (Printer Properties)

 

8. If you have gone through all the steps, the printer should print without problems again!

 

Um das To avoid drying out and clogging the print head, you should print at least every 2 weeks, 1 page (test page goes, the main thing running through liquid)